We never charge a handling fee, we want your business!
Everything listed here is the Total delivered cost with free Priority Shipping 1-3 days and no other fees!
IMPORTANT
If you are buying multiple items, send us an email of each Item # you want and we will be happy to combine them into one box and discount the total order for
you.
We offer DEEP Discounts when you buy multiple items at the same time. Just place an order for a regularly priced item and then select the "Add to Existing Order:" for
Major savings!
- Made in the USA
- One piece forged High carbon steel hitch pin with wide bonnet
- Tough Spring wire handle
- Yellow zinc dichromate double plated and coated
- Cat1 size
- Shaft Diameter: ¾”
- Useable Length: 4-1/4"
- Lynch pin and R clip included
Cat 1 Top Link Pin with Yellow Zinc Dichromate
- Made in the USA
- Forged Pin with standard bonnet and Yellow zinc dichromate
coated
- Included Yellow zinc dichromate Lynch Pin
- Pin Diameter: 3/4 in
- TLP1-2L
- Usable Length: 3-7/8 in
- Total length: 5-1/2 in
- TLP1-2S
- Usable Length: 2.75 in
- Total length: 4-3/8 in
Cat 1 Top Link Pin with an Extra Wide Bonnet
This pin is made a little different than the standard Top Link Pin. At its center is a hardened forged core with a softer dipped metal around it for flexibility and
multi-layered in chrome.
- Made in the USA
- Forged and multi-layer chromed
- Extra Wide Bonnet to prevent slippage or hole rounding
- Has a pull ring attached to Top Link Pin
- Pin Diameter: 11/32 - 3/4" (1/32" possible difference due to molten metal dipping for outer shell)
- Usable Length: 3-15/16"
- Total length: 6"
- Included Yellow zinc dichromate Lynch Pin
Pin Kit 1
Lynch and PTO pins with Yellow Zinc Dichromat
This 11 piece Pin Kit provides the most common types of pins needed to secure your tractor parts. It contains all of the following
high quality carbon steel:
- Lynch Pins-Yellow zinc dichromate plated:
- Quantity 2, 3/16” by 1-7/16”
- Quantity 2, 1/4” by 1-3/4”
- Quantity 2, 5/16” by 1-3/4”
- Quantity 2, 7/16” by 1-3/4”
- PTO Pins-Yellow zinc dichromate plated with tempered spring action:
- 1/4” by 2-5/8” usable 2-1/4” D type
- 5/16” by 2-5/8” usable 2-1/4” Square type
- 3/8” by 2-1/4” usable 1-7/8” D type
Pin Kit 2
Clevis Pins:
This 7 piece
pin kit is made of high quality carbon steel:
- Quantity 2, ¼” by 2”
- Quantity 2, 5/16” by 2”
- 3/8” by 2”
- 7/16” by 2”
- 1/2” by 2”
Pin Kit 3
This 18 piece Pin Kit includes all the pins from our Pin Kit 1 and our Pin
Kit 2, all in high quality carbon steel:
Pin Kit 1
- Lynch Pins-Yellow zinc dichromate plated:
- Quantity 2, 3/16” by 1-7/16”
- Quantity 2, ¼” by 1-3/4”
- Quantity 2, 5/16” by 1-3/4”
- Quantity 2, 7/16” by 1-3/4”
- PTO Pins-Yellow zinc dichromate plated with tempered spring action:
- ¼” by 2-5/8” usable 2-1/4” D type
- 5/16” by 2-5/8” usable 2-1/4” Square type
- 3/8” by 2-1/4” usable 1-7/8” D type
- Clevis Pins:
- Quantity 2, ¼” by 2”
- Quantity 2, 5/16” by 2”
- 3/8” by 2”
- 7/16” by 2”
- 1/2” by 2”
Inline Pressure Tester for Hydraulics
- The Inline Tester allows you to test your hydraulics without fear of burning up your pump or causing damage to your tractors’ valves or
hydraulic fluid, like with a dead end tester.
- You connect this between two points and operate your tractor or implement for testing normally while you evaluate the situation.
- 2 year non-commercial, 1 year commercial warranty,
- Tractor type male and female quick connectors,
- Free upgrade to Swivel hose connectors,
- Your choice of 3,500 psi hose lengths of 12”, 24” or 36”,
- 5,000 psi, glycerin filled dial comes in two styles:
- Grade A
- Grade A Dial with Pressure relief port
- ½” fittings throughout
- Grade B
- No relief port
- Dial is ¼” inlet
Heavy Duty Ratcheting Tie Down Straps
This ratcheting
tie-down strap is ideal for securing heavy loads with a massive breaking strength of 10,000 lb. and its quick ratcheting system is designed to secure and hold your load.
- 27 Foot long and 2 inch wide
strap,
- Hi-Test webbing with 10,000 lbs. break strength,
- 3,000 lbs. working load limit,
- Weather resistant and UV- protected for durability,
- Reinforced stitching,
- High visibility yellow webbing,
- Long and Wide ratchet handle for increased tension per ratchet and use with gloves,
- Easy quick-release feature,
- Hardened double J-style hooks to grip your anchor points,
- High quality hardware with Dichromate steel for corrosion resistance,
- Meets department of transportation guidelines for fleet cargo transportation,
- 2 year non-commercial, 1 year commercial warranty.
Heavy Duty Ratcheting Tie Down Bonnet
This over-the-wheel Ratcheting tie-down basket or bonnet fits over the tire and securely holds the vehicle in place. The ease
and speed in which this can be used will save you over 30 minutes trying to figure out how to rout your normal tie down chains or straps.
- Ideal for car restoration, hauling jobs, transportation and moving systems,
- Can be used as a side mount wheel net,
- Ideal for tow dolly applications,
- 15 Foot long
and 2 inch wide strap,
- 10,000 lbs. break hi-test webbing strength,
- 3,000 lbs. working load limit,
- Weather resistant and UV- protected for durability,
- Reinforced stitching,
- High visibility yellow webbing,
- Long and wide ratchet handle for increased tension per ratchet and use with gloves,
- Easy quick-release feature,
- Hardened spring-loaded snap shut hooks,
- Thin hooks to fit between trailer boards for quick tie down of equipment,
- Bonnet easily fits tractors, skid loaders, loaders, cars, trucks, quads, utv’s, etc for a secure fit and fast tie
down,
- Two or more bonnets are recommended to be used together, never just use one tie down point.
- 2 year non-commercial, 1 year commercial warranty.
Tow Hook
MADE IN THE USA
Our HDExtremeTools tow hooks come packaged with all of the necessary hardware
that you need to suitably equip your Tractor, Trailer, Vehicle or UTV.
These HDExtremeTools tow hooks are highly durable and better than our
competitors since we construct them from Forged and Heat treated steel, then powder coat them for years of reliable use to keep their looks great!
We take these and attach them to the inside of the Tractor buckets vs the
backside, so that the bucket will act as a barrier if your chain or strap fails and snaps back. Drill 2 holes in the center of the bucket towards the top, but below the lip.
Don't get stuck in a bad place without the HDExtremeTools tow
hooks:
- MADE IN THE USA
- Forged steel and heat treated for extra strength,
- Black Powder coated finish,
- Length is 6”,
- Hook Opening is 2”,
- Throat Depth is 1-1/8”,
- Max capacity 10,000 lbs. GTW,
- All Needed Hardware:
- Hardened bolts, washers and Nylon lock nuts,
- Spring metal safety clip.
- 3 year non-commercial and commercial warranty.
Buckets for all K-2 models
Made in the USA
All of our buckets are Heavy Duty reinforced and ribbed with replaceable teeth. The extra thick metal of the bucket along with the ribbing will allow you to dig
aggressively and have your bucket last longer. These are high quality buckets.
Having replaceable bolt on teeth is very important since teeth wear down over time and need to be replaced. The extra cost and time we spent drilling and bolting on
the teeth will be appreciated by you in the future when you need to replace the teeth and you do not have to spend a day cutting, grinding and welding.
You want heavy duty buckets with replaceable teeth like ours! Nothing sucks like digging in rocky ground and busting a tooth or cracking a bucket because you saved a
few bucks and now have to spend the day trying to “fix” or “get by” with a bad bucket. Solve this problem before it happens and buy original K-2 buckets from us and avoid these issues.
We offer many popular bucket sizes that allow you to customize your dig for why you are digging. You don’t want to dig a 24” trench for a 2” pipe or have an 10” bucket
for a 16” footer. We have the popular sizes available; 10, 12, 14, 16 & 24" to save you time and money.
Universal Replacement Rippers
Universal Replacement Rippers
Are you tired of cheap China made rippers? If so then try these great rippers!
- MADE IN THE USA
- Designed to fit your box blades and other implements
- Forged and rounded Ripper shanks,
- Replaceable teeth,
- Easy pull pins
- Comes with detachable Crimp-on Ripper Point that is heat treated for durability
18” Shank
- Length: 18”
- Width: 2-1/2"
- Thickness: 3/4"
- Number of holes: 4
16" Shank
- Length: 16"
- Width: 1-7/16"
- Thickness: 3/4"
- Number of holes: 3
Ripper Point for 3/4" Box Blade Shank
- Standard Crimp-on style Ripper Point
- Hardness: RC 38-42 (Heat treated steel)